Toggle switch manufacturers tell you that the toggle switch has many precautions to introduce you one by one.

1. Careful use of chemicals

Because of the use of synthetic resins such as polycarbonate, the potentiometer should be avoided by exposing it to ammonia, amines, alkali solutions, hydrofluorocarbons, ketones, esters, halocarbons and other chemicals in a strong atmosphere.

2. Careful use of flux

The use of water-soluble flux should be avoided when soldering, otherwise it will have an adverse effect on the metal and other materials that make up the toggle switch.

3. Solder

The wiring design and soldering method should avoid causing molten tin to flow to the PC board surface, which will cause poor contact.

4. Low temperature operation

When the product is used for low temperature environment, such as cold zone car radio or car stereo, the company according to customer requirements to provide feel comfortable products, please explain when ordering.

5. Slide length

The shorter the length, the better (at least 5mm) in the case that the width of the slide handle A is unchanged, the shorter the length of the slide handle, the better the feel, and the higher the output point, the worse the feel.

6. Drive arm

Do not keep the operating point far from the center line of the slide handle, for the same reason, the shorter the distance between the two, the better.